• Teflon Fused Ball Valves, 1/2"- 10"
• Cast 316 SS Ball Valves
• Cast & Ductile Iron
• Thermoplastic Valves
• Bronze Commercial Valves
  

• Thickeners
• Dewatering Equipment
• Dryers
• Thermal utilization plants: Eco Dry® system

• High Efficiency Turbo Blowers
• World�s First Mega Watt Turbo Blower
• Natural Gas / Bio Gas Blower
• Complete Aeration System

• Electric Actuators
• Electric Multi-turn Actuators
• Valve Gearboxes

• AWWA Gate Valves 2” – 48”
• C–500, C–509, & C–515
• Eccentric Plug Valves C–504, C–507 3” – 24”
• Butterfly Valves C-504 4” – 48”
• Check Valves C–508 2” – 30”
• ULFM Indicator Posts
• Hydrants- AWWA C–502 ULFM

• Plug Valves
• Butterfly Valves
• Check Valves
• Air Valves & Surge Relief
• Ball & Cone Valves
• Water Control Valves

• Expansion Joints
• Duck Bill Check Valves

• Weir Type & Straight Way Diaphragm Valves
• Rubber, Teflon & Glass Lined

• Eccentric Plug Valves
• AWWA Butterfly Valves
• AWWA Check Valves
• Swing Check Valves
• Check Valves
• 2"- 54"
• Wafer Style
• Dual Disc
• Outside Lever & Weight
• Air & Oil Cushioned

• Grinder Pumps
• Solids Handling Pumps
• Effluent Pumps

• Mosites Butterfly Valves
• Dry Powder Applications Samper Style

• Industrial Butterfly Valves w/ 3-year Warranty
• 2” – 36” Size
• Teflon Lined Butterfly Valves
• Control & Piston Check Valves
• Liquid Level Controls

• Knife Gates 2"- 144"
• Slide Gates
• Wedge Gates
• Slurry Valves & Actuators

• High Performance Pinch Valves
• 1" - 60" up to 300°F
• Up to 600 PSI Line Pressure
• Full Range of pH
• Air Flex Valve
• Vent-O-Mat Air Release Valves
• RBX, RGX, and RPS Series

Amico/Seasafe is a manufacturer of molded fiberglass reinforced plastic (FRP) grating. Seasafe's products can be used in various markets and applications including water and wastewater, chemical, oil and gas, pharmaceutical, pulp and paper, metals and mining, transportation, telecommunications, architectural and recreation.

GatorGrate is a one-piece (integral), reinforced polyester or vinylester FRP grating available in standard panels and sizes. It is manufactured by interweaving continuous, thoroughly-wetted, fiberglass strand with thermosetting resin systems. Typical applications include floor systems, walkways, work platforms, stairs, ramps, trench covers and catwalks. GatorGrate's integral, long-lasting anti-slip top surface makes this the grating of choice in many industries. It is preferred when slippery working conditions are present.

GatorDeck has a primary advantage over molded FRP gratings (other than being generally lower in cost): It has superior load-supporting ability over longer spans. GatorDeck is the result of a continuous molding technique in which glass roving, glass matting and a synthetic surface veil are literally pulled (pultruded) simultaneously through a flame-retardant polyester or vinylester resin bath. GatorDeck also features a two-part mechanical locking cross-rod, which increases the support and stability of the grating under extreme loads. The patented flush-top design of the cross-rods and bearing bars also enhance the unidirectional strength and provide easy fabrication and installation.

• 44+ YEARS EXPERIENCE

• GUARANTEED NON-CLOG

• FREE TRIALS AVAILABLE

• LOW LIFE CYCLE COSTS

• EXPEDITED DELIVERY

• MULTIPLE CONFIGURATIONS

• Sludge Storage Tanks

• CSO Tunnels

• CSO Retention Basins

• Equalization Tanks